- Cabs & Sterling Supplies
- >
- STERLING/GOLD FILLED/COPPER WIRE
- >
- Gold Filled Wire
- >
- Gold Filled Wire By The Foot 26 Gauge Jewelry Supply Savannah Jewelry Supply
Gold Filled Wire By The Foot 26 Gauge Jewelry Supply Savannah Jewelry Supply
Gold Filled Wire By The Foot 26 Gauge Jewelry Supply Savannah Jewelry Supply
THIS LISTING IS FOR 1 FOOT. If you would like more than 1 foot just increase the quantity and it will come in 1 continuous piece. Ex: a quantity of 3 = 3 continuous feet of wire.
14/20 14K Gold Filled Round Wire - BY THE ONE FOOT PIECE
I also have this wire available in Gauges:
30, 28, 26, 24, 22, 20, 18, 16, 14, 12, 10, 8
From the manufacturer:
What is the definition for white gold-filled, yellow gold-filled, nickel-plated, and yellow-plated?
Gold-Filled
The term gold-filled refers to the manufacturing process in which a sheet of base metal, usually brass, is mechanically bonded with thinner sheets of gold. A "sandwich" is formed by mechanically bonding a layer of gold on both sides of brass. This "sandwich" is then cold worked by rolling until a much thinner gauge metal is achieved. Products are then formed or die-struck from this layered material.
When a layer of gold is affixed on all surfaces by any mechanical means and the weight of the gold is a minimum of 1/20 of the total weight of the metal in the article, it may be marked Gold-Filled (GF). The quality of the gold used is typically 10, 12 or 14 karat gold with 10 karat being minimum. Hallmarking would look like “10K GF” or “14K GF”. Yellow gold-filled or white gold-filled simply indicates the color of the karat gold used in the making of the gold-filled product.
The terms “Rolled Gold Plate” and “Gold Overlay” refer to the same bonding process; however, the weight of karat gold is less than 1/20 but not less than 1/40 of total weight of metal. Hallmarking would look like “1/30 12K R.G.P”, “1/40 10K Gold Overlay”.
Gold Plated
When a product is referred to as gold, rhodium, or nickel-plated, this indicates that it has been electroplated with a thin layer of that particular metal. An article of jewelry is Gold-Plated when gold is electroplated or mechanically sheathed with a minimum thickness of 1/2 micron (20 millionths of an inch) of fine gold. The quality of the gold used is typically 10, 12, or 14 karat. The karat quality of the gold plating must be disclosed, and it can be described as 12K Gold Plate or 2μ 12k G.P. for an item plated with two microns of 12 karat gold.
Wild Prairie Silver Jewelry Co.
Handmade Sterling Silver Jewelry http://www.joykruse.etsy.com
Handmade Sterling Silver Jewelry http://www.wildprairiesilver.etsy.com
Make Jewelry By Hand http://www.wildprairiesilver.wordpress.com
Sterling Silver Handmade Jewelry http://www.wildprairiesilver.com
Sterling Silver Jewelry Supply http://www.midnightinsavannah.etsy.com
Email: joy@joykruse.com
Pictures and Inspiration daily on Instagram and Facebook: https://www.instagram.com/wildprairiesilver http://facebook.com/wildprairiesilver